SOLD UNITS
|
1950 Ford Pickup - Stock #2160 This F-1 Pickup would make a nice rod with great patina. Has lots of bumps and bruises from 70 years of use. The doors and cab corners look solid. Real decent floors. Has the flathead V-8 motor and 4 speed transmission. Good North Dakota Title and delivery is available. SOLD! |
|
1951 Chevrolet Pickup - Stock #2136 Original 3600 Series Pickup with nice patina. Has the 216 motor and 4 speed transmission. We never tried the motor. Needs a wood kit in the box. Has a few easy fix bullet holes in the hood. The left A pillar will need some work where the door hit it and also has some rust at the top. The cowl panel is available from LMC for $59. Not bad for dents or rust. Good N.D. Title and delivery is available. SOLD! |
|
1951 GMC Truck - Stock #2092 Nice GMC Dump Truck for restoration or use it like it is with minimal repairs. Has the short 137" wheelbase. Has a good running 235 GM motor and a 4 speed transmission along with a 10 foot Knapheide steel box and hoist. It also has removable sides if you want a flatbed. Not bad for dents. Very solid truck with only minimal floor work needed. Shows 65,000 miles. Good rear tires and new front tires. This is the 281-22 Series Truck. Good North Dakota Title and delivery is available. SOLD! |
|
1951 International Pickup - Stock #1938 This is the L-120 Series with a 6 cylinder motor and a 4 speed transmission. We never tried the motor. The body is quite good with very little rust through. Floors have some scaling. They look solid. Normal bumps and bruises from 65 years of use. Shows 50,731 miles. Good Title and delivery is available. SOLD! |
|
1956 International Pickup - #2021 This is a nice shortbox stepside S-100 model with a 6 cylinder motor and a 3 speed standard transmission with overdrive. The motor is free and should run. Has rust in the cab corners and a little in the bolt-in floor transmission covers. Floors and floor structure look good. It will need some patch work on the box floor. Great patina on a hard to find pickup. Not bad for dents. Good North Dakota Title and delivery is available. SOLD! |
|
1958 Ford Truck - #2091 Here is a very nice '58 that is ready to go to work. Shows 84,000 miles. Has the V-8 motor along with a 4 speed transmission and a 2 speed axle. Has a bit of lower rust but not bad at all. Runs great. Has a very nice 15 foot steel box with removable box extension or removable sides if you just want a flatbed. This one even has the steel plank floor. Custom cab option as well! Very nice truck! Good Title and delivery is available. SOLD! |
|
1959 Ford Pickup- #2131 This half ton Ford has a good running 6 cylinder motor and a 4 speed transmission. The former owner started restoration and gave it a rattle can paint job to preserve it. Has rust in the rear tailgate and also in the box floor plus a few other miscellaneous spots. The floors will need minor patch work. The truck has been updated with newer Ford styled wheels. Custom cab. Good N.D. Title and delivery is available. SOLD! |
|
1962 Chevrolet Pickup - Stock #1586 Nice Chevrolet C10 for restoration. Has a 6 cylinder motor and it is free. Has the 3 on the tree transmission. Floors have minimal rust. Front fenders have the usual rear rust. Looks solid above the windshield. Will need a tailgate and wood kit for the box. All-in-all a nice one to restore! Good North Dakota Title and delivery is available. SOLD! |
|
1962 Ford Truck - Stock #2104 This truck has minimal work and is ready to go to work! This F-600 has a running Ford Y block V-8, 4 speed transmission and 2 speed axle. The 15 foot flatbed comes with a hoist. The decking is old and will need some work. The truck has some rust and bruises from years of use. It was just driven 100 plus miles to my shop. Great patina! Good North Dakota Title and delivery is available. SOLD! |
|
1963 Ford Pickup - Stock #2014 This is a half ton long box with the 292 Y Block and a 3 speed standard transmission on the column. Custom cab. Lots of parts here. SOLD! |
|
1967 Ford Pickup - Stock #2087 Here is a nice halfton custom cab Ford for restoration or do a little work and drive it like it is. Needs a door skin on the right door. Otherwise the body looks quite good with minimal rust. This F-100 has a good running 360 motor and an automatic transmission. Good North Dakota Title and delivery is available. SOLD! |
|
1968 Ford Pickup - Stock #2143 Very nice half ton Ranger for restoration or do some mechanical and drive it just like it is. I see a spot of rust in the tailgate and a little in the box floor. Otherwise it looks good and very few dents. Original paint. Very nice floors. Former owner said the motor was a 390. Has the automatic transmission. Very nice body. Good N.D. Title and delivery is available. SOLD! |
|
1941 Ford Truck - #2064 Lots of possibilities here! This truck has the flathead V-8 and a 4 speed transmission. Has cab corner rust, some lower door rust and minor floor rust. Not bad at all for dents. Very nice grill. Has great patina for a rod just the way it is now. Shows 59,000 miles. Good North Dakota Title and delivery is available. SOLD! |
|
1946 International Truck - Stock #2027 Nice truck for restoration or use the cab and front on your next rod! Real decent body with very little rust and not bad for dents. Original paint. Has a non-running overhead valve 6 clinder IH motor, 4 speed transmission and a 2 speed axle. Nice grill. This is the K Series truck. Good Title and delivery is available. SOLD! |
|
1937 IHC Truck - Stock #2094 This truck will be parted out or add a front clip and put it back on the road. Good North Dakota Title and delivery is available. SOLD! |
|
1948 Ford F-7 Truck - Stock #1070 This truck will be parted out. The flathead V-8 is gone. It has a 5 speed transmission. Very solid but cab back is damaged. SOLD! |
|
1949 GMC Pickup - Stock #585P This is a very nice 5 window cab. Nice floors. Has the VIN tag and sold with a Bill of Sale if you need it. Cab or cab frame is $2,000. Delivery is available. SOLD! |
|
1951 GMC Truck - #1462 This is from a 1951 GMC 350 truck, same cab as the pickup. Quite solid. Has a dent in the left door and some roof damage. Otherwise looks good. The cab comes with a good North Dakota Title. The cab is $1800 and the front clip is $600. SOLD! |
|
1952 Chevrolet 4 Door - Stock #571P This is the Deluxe Model. Lots of parts here. SOLD! |
|
|
1963 Ford Pickup - Stock #2014 This is a half ton long box with the 292 Y Block and a 3 speed standard transmission on the column. Custom cab. Lots of parts here. SOLD! |
 |
 |
 |
 |
 |
 |
 |
 |