PARTS FOR SALE




Click For More Photos
Truck Hoist (lift) - 539P
This is a nice "Perfection" brand Hoist that had a 14' box mounted on it. Hoist is 14' x 1 3/4" long but could very easily be cut down for a shorter box. It was on a truck with a 34 inch wide frame. The hoist is self contained as it has the hydraulic pump already mounted to the unit. All it needs is your pto for service.
$475

Click For More Photos
1931 Ford Slantpost - #950
This car is rough but has a few hard to find parts on it yet.
Let me know what you need!

Click For More Photos
1934 Ford Pickup Cab - #618p
This cab has lower body rust in the body and floor structure. The left door is missing. Dash and windshield frame are there. Find a door and here is a great start on a rat rod pickup. Delivery available.
$1500

Click For More Photos
1938 Chevrolet Coupe - #624P
Has a few parts left on this one.
Let me know what you need!

Click For More Photos
1938 Lincoln Zephyr 4 Door Sedan - #423
This would make an awesome rat rod. Floors are rusty. Drive line is gone. Very nice styling for a rod. The dash is there and nearly all of the garnish mouldings are included. The dash has been sold and the left grill has been sold. The parts are worth more than the asking price on this one. Good North Dakota Title. Delivery available. Let us know what parts you may need. The left fender has been sold.
$1,800 for the complete vehicle

Click For More Photos
1940 Ford Cab - Stock #606P
This is a 1940 to 1946 Ford cab and doors that is in real decent shape. Has a little cab corner rust and a small spot in the right door and right cowl tip. Windshield header looks good. Has solid floors. Delivery available.
SOLD!

Click For More Photos
1941 Chevrolet Coupe - Stock #2018p
If you are looking for parts, let me know what you need. If you want the complete car, it is $800.
Let us know what you need!

Click For More Photos
1941 Ford - Stock #631p
This is one we are going to part out. Lots of good parts. Let us know what you need. It is sitting on a frame from something else but the original frame and VIN are there and good.
Let us know what you need!

Click For More Photos
1946 Ford Pickup - Stock #1936
If you are building a rat rod, check this one out! Decent body and floor with some lower body rust. $1,200 for the body with hood and $600 for the front clip as shown.
Let us know what you need!

Click For More Photos
1947 Ford Pickup - #1393
Good solid front clip from a 1947 Ford F-3 pickup. Lots of good parts.
Let me know what you need!

Click For More Photos
1948 Chevrolet Cab - Stock #602P
Real decent cab for your project with only minor rust. Complete with doors. Delivery available.
$1,900

Click For More Photos
1948 Ford Pickup - Stock #573P
Lots of good parts on this pickup including a decent cab and doors. Good Title and delivery is available.
$1,850

Click For More Photos
1950 Ford Truck - Stock #364P
This is an F-6 Ford with a 4 speed transmission and a 2 speed axle. This is one we are parting out and we have a few more with many parts. Same cab as the F-1 pickup.
Let me know what you need!

Click For More Photos
1951 Ford F-7 Clip - Stock #613P
Very nice '51 or '52 Ford F-7 "Big Job" front clip with running boards. These are wider than an F-6 and under so real hard to find if you need one. The only rust I see is a small area by the running board and not bad for dents. Delivery available.
$1,250

Click For More Photos
1951 Ford F-8 Truck - #1469P
This truck has some hard to find parts left on it. Has front fenders, hood, radiator, front bumper and more. The frame, suspension and rear 2 speed axle are there along with the air pump for the air brakes. Let me know what you need. The fenders are great if you want to widen out one of the F5 or F6 trucks.
Let me know what you need!

Click For More Photos
1952 Ford Cab - Stock #574P
1952 Ford Cab with doors and VIN tag.
$1,850

Click For More Photos
1952 International Truck - Stock #609P
This is a Model L120 Series. We have some parts left.
Let me know what you need!

Click For More Photos
1952 International Truck - Stock #611P
This is a Model L150.
Let me know what you need!

Click For More Photos
1952 Studebaker Pickup - Stock #517P
This is a Model 2R10-22. Still has some good parts.
Let me know what you need!

Click For More Photos
1953 Chevrolet Front Clip - Stock #617P
Real decent clip with only minimal rust. Grill and surround look to be all rechromeable.
$500 for all

Click For More Photos
1954 Buick - Stock #201P
If you are looking for parts, let us know what you need. If you want the entire car the price is $1,200.
Let me know what you need!

Click For More Photos
1956 Chevrolet Cab - Stock #542P
Real decent cab. Will need cab corners. Nice floors and the windshield header looks good. Has a few misc. dents. Looks rough because the previous owner stripped off a lot of paint. Delivery available.
$1,850

Click For More Photos
1958 Chevrolet Cab - Stock #995
This cab will need cab corners. It also needs some roof work above the right door and some door dent repair. Real solid floors and the windshield header looks good as well. Delivery available.
$1,850

Click For More Photos
1960 Chevrolet Truck - Stock #2115
This is a 60 Series Viking Truck with the 261 six cylinder motor, 4 speed transmission and 2 speed axle. The 261 motor is free. You can see the captains bars identifying the 261 motor in the pictures. Rusty cab so we will part this one out. The motor is $800.
Let us know what you need!

Click For More Photos
1960 Ford Truck - Stock #1445
No Title on this one so we are parting it out. Only 14,000 miles. Same cab as the F-100. Has a good running Y block motor and a 2 speed axle. Has a small rust spot in the door tips. Otherwise, very solid with good floors. Will need some roof work on the cab. Very nice cab.
Let us know what you need!

Click For More Photos
1962 Chevrolet BelAir - Stock #1447
Lots of good parts. Let us know what you need. The hood and left fender are gone.
Call and let us know what you need!

Click For More Photos
1963 Chevrolet - Stock #513P
Great parts car for your needs.
$850

Click For More Photos
1963 Chevrolet - Stock #1610
Lots of good parts on this one or buy the whole car. Has a 6 cylinder motor and a standard transmission. The motor is free. Lots of chrome parts inside the car.
Let me know what you need!

Click For More Photos
1963 Ford Pickup - Stock #843
Lots of good parts on this pickup. The cab floor is rusty. Has a good running Y block motor. Real decent box for $500. Rear differential has been sold.
Let me know what you need!

Click For More Photos
1963 Ford - Stock #1643
Lots of good parts. Has small block V-8 with a standard transmission.
Let me know what you need!

Click For More Photos
1963 Ford 4 Door - Stock #1644
This is a Galaxie 500 4 door with a 390 motor and an automatic transmission. Lots of good parts.
Email classic1934@gmail.com
Let me know what you need!

Click For More Photos
1964 Plymouth - Stock #596P
This 4 door Sedan has some parts left. The slant 6 motor is free. Has the 3 speed standard "three on the tree" transmission.
Let me know what you need!

Click For More Photos
1966 Pontiac Cataline 4 Door - Stock #1075
Lots of good parts on this car. Very nice front clip. Has small rust spot in the bottom of the fenders. The motor and tranny are gone. Update: the body has been sold but the front clip is available.
Let me know what you need!

Click For More Photos
1969 Buick Skylark - Stock #575P
This car has lots of good parts. It is the "Custom" Model with the 400 engine and automatic transmission. Let us know what you need. $600. for the complete car.
SOLD!

Click For More Photos
1994 Corvette Body - P174
Here is a real nice Corvette rear clip plus a real nice loaded right hand door. Right cowl pillar appears to be okay plus a lot of miscellaneous pieces. Give us a call and let us know what you're looking for.
Call!

Click For More Photos
2002 Corvette Coupe - #357C
Good rear clip, good right door. Repairable hood. Other parts. Give us a call and let us know what you're looking for.
Email classic1934@gmail.com
Call!