SOLD UNITS

	1948 Chevrolet 5 Window Pickup - Stock #1833 Here is a 3600 Series 5 window pickup with great patina! Set this one on an S-10 chassis and drive it like it is. Has a non-running 6 cylinder motor and a 4 speed transmission. Has some bumps and bruises from 70 years of use but not bad. Floors will need a little bit of rust repair. This pickup also has the stainless trim package. A good North Dakota Title comes with this pickup and delivery can be arranged for you. SOLD!
	1948 Jeep CJ 2 - Stock #1499 Good one to rebuild. This is a CJ 2 with the 4 speed transmission and 4 wheel drive. Motor is out but is included as is the steering column. Has some floor rust and cowl rust but very repairable. Good North Dakota Title and delivery is available. SOLD!
	1949 Ford Pickup - Stock #1750 This is an F-3 Pickup that would work well for a ratrod or restoration. Has the usual bumps and bruises from 65 years of use. The motor and transmission have been pulled. Solid floors. Comes with a good Title and delivery is available. SOLD!
	1949 Willy Overland Jeep Pickup - Stock #1525 Nice Jeep 4 x 4 Pickup for restoration or build a Custom! Other than a little rust in the passenger lower door, I really don't see any. Solid floors. Shows 28,383 miles and believed to be actual. Has the Kaiser flathead 6 cylinder motor. The motor is free and should run. The hood is rough. Otherwise the body is quite nice. No box. Good North Dakota Title and delivery can be arranged for you. SOLD!
	1950 Chevrolet Truck - Stock #2005 This is a very nice original one ton 3800 Series Truck. I really don't see any rust and very few dents on this truck. Original paint. Has a 6 cylinder motor, a 4 speed transmission, and the motor is free. Has a 10 foot box with a hoist. Do some work on this one and use it like it is. Good North Dakota Title and delivery can be arranged for you. SOLD!
	1951 Chevrolet Truck - Stock #1712 Very nice 3800 Series 1 ton for restoration. Has rust in the cab corners and cowl tips. Otherwise looks good. Very little floor rust. Real straight body with original paint. Has a 9 1/2 foot bed with a verticle lift. We had the 216 motor started and it ran good. Has a 4 speed transmission. Nice truck! Good North Dakota Title and delivery is available. SOLD!
	1951 Chevrolet Pickup - Stock #1810 Nice 5 window pickup for restoration or rodding. Great Patina! Minimal rust and minimal dents. It does need the left floor pan and some work on the right one. A new left panel is included. Has the 216 motor and a 4 speed transmission. These work well on an S10 chassis. Cut the box front and they make a nice short box 5 window. Good North Dakota Title and delivery is available. SOLD!
	1952 Ford Truck - Stock #1797 This Ford F-6 will make a nice project for someone. There is very little rust at all in this truck. Great floors. Not bad for dents. Shows 48,000 miles and this is supposed to be actual. The motor was rebuilt and installed but never run due to health issues. Probably stuck now but usually not an issue to fire up. Has a factory 12 foot flatbed with a hoist. Nice truck! Good Title and delivery available. SOLD!
	1953 Chevrolet Pickup - Stock #776 This is the popular halfton shortbox pickup. It has a non-running 235 six cylinder motor and a 4 speed transmission. Real decent body. The pickup will need the floors replaced on the right and left. The sections cost about $47 each. The right box side will need some work. Comes with the seat frame. Priced right! Good North Dakota Title and delivery is available. SOLD!
	1953 Chevrolet Pickup - Stock #2006 If you are looking for a nice short box half ton, check this one out! Very solid pickup with good floors. It was a 3 speed column shift and now has a 4 speed. Great patina! The 6 cylinder motor is free. Will need a little work on the left cowl. Needs a wood kit in the box floor but has a very nice box. Don't miss this one! Good North Dakota Title and delivery can be arranged for you. SOLD!
	1953 Ford Pickup - Stock #1534 Great project F250 for restoration. Has a flathead V-8 motor and a 4 speed transmission. The motor is free. Very solid body with great floors. Not bad for dents. Shows 96,000 miles and is very complete. Good North Dakota Title and delivery is available. SOLD!
	1953 Ford Pickup - Stock #1981 This is a very nice F-100 Shortbox Ford. It is an older rod project purchased from an estate. Has a 350 Olds motor and an automatic transmission. The motor is free. It has rust in the cab corners and running boards. Otherwise I see none. Has very nice floors. Not a lot of dents in this one. Great project pickup in a very desirable model! Good North Dakota Title and delivery is available. SOLD!
	1954 Ford Pickup - Stock #1914 This is a good Ford F250 for restoration. Has a Y Block motor with a 4 speed transmission. The motor is free. Not many dents and minimal rust. The running boards have rust and the lower door tips have a bit of rust. Floors are very nice with only minimal rust by the mount. Great project pickup! Good North Dakota Title and delivery is available. SOLD!
	1956 Jeep Wagon - #1493 Check out this 2 door Jeep Wagon! Ready for a Custom build! It was set up for a 350 Chevrolet and has a lift kit along with nearly new wheels and 33 x 12.5 XR15 tires. Has some lower rust along the floor line. Not bad for dents. Come with all of the inside garnish mouldings and rear bumper. The front footwell area of the floors will need some patch work but the rear floors look good. Good North Dakota Title and delivery is available. SOLD!
	1958 Chevrolet Truck - #2000 This is the Viking 60 Series with a 12 1/2 foot Midwest box with hoist. Has a running 6 cylinder motor, 4 speed transmission and a 2 speed axle. Shows some cab corner and rear fender tip rust and also has some rust above the windshield. The floors will only need minor work. All-in-all a real decent body. Good tires. Has a good rear tow hitch. With very little work this truck will be ready to go to work. Good Title and delivery can be arranged for you. SOLD!
	1964 GMC Pickup - Stock #1086P This is the halfton model with a good running 6 cylinder motor and a 3 speed standard column shift. It may need a clutch. Not much at all for rust but has quite a few repairable dents. Floors are decent but will need a little patch work. Do just a little mechanical work on this one and drive it like it is. Good Title and delivery is available. SOLD!
	1978 GMC Sierra Grande Pickup - Stock #1820 This is a 1/2 ton 2 wheel drive with a good running 454 motor and an automatic transmission. Has been parked for a few years so may need fluids checked, etc. if you are going to drive it. Good Title. SOLD!