SOLD UNITS
|
1933 Ford Pickup - Stock #1663 If you are looking to build a ratrod, take a look at this one. Real solid cab with good floor structure. It has the usual bumps and bruises from 80 years of use. Comes with a good 1933 Ford Pickup Title. Don't miss this great one to build! Delivery available. SOLD! |
|
1934 Ford Truck - Stock #1700 This is a nice 1934 truck for restoration or rodding. The grill is rough. It has a spot of rust in the left cowl tip. Otherwise the truck looks real solid with good floors. The cab is about as nice as they come anymore. It still shows the original pinstripping from Ford. The truck has a flathead V-8 motor and a 4 speed transmission. It also has a 12 foot flatbed. It shows 40,000 miles on the odometer. The truck comes with a good North Dakota Title and delivery can be arranged. SOLD! |
|
1936 Chevrolet Truck - Stock #1713 This is a nice truck for restoration or your next rod project. Solid floor structure. Has a 216 six cylinder motor and a 4 speed transmission. Has some roof dents and lower rust. Good cab corners. Nice grill. This is the 131 inch short wheel base model. Don't miss this one! Good Title and delivery can be arranged for you. SOLD! |
|
1940 Chevrolet COE Truck - Stock #1682 Nice cabover for your next project. Quite complete. Solid floors. The front fenders are rough. Otherwise not bad at all. Decent grill. Crankout windshield. Has a 6 cylinder motor, 4 speed transmission and a 2 speed axle. These are getting very hard to find! Comes with a good North Dakota Title and delivery is available. Don't miss this one! SOLD! |
|
1941 Chevrolet Truck - Stock #1697 Nice truck for restoration. Has a 216 six cylinder motor and a 4 speed transmission. Runs real good. Has a 12 foot box along with a hoist. Has 32,000 miles. Not bad for dents and very little rust. Good floors. Do a little work and put this one to work or an easy restoration. Good Title and delivery is available. SOLD! |
|
1941 GMC Pickup - Stock #1583 Nice pickup for rodding or restoration. Quite complete. Minimal rust. Needs rear fenders and tailgate. Very desirable body style. Has a non-running 6 cylinder motor and a 4 speed transmission. Good floors. Comes with a good Title. Delivery can be arranged. SOLD! |
|
1946 Chevrolet Truck - Stock #930 Very nice 1 1/2 ton truck for restoration. Very nice body. Solid floors. Has a non-running 6 cylinder motor and a 4 speed transmission. Also has an 11 1/2 foot flatbed with a hoist. Very nice grill but it will need the center bar replaced. Good N.D. Title and delivery available. SOLD! |
|
1947 International Truck - Stock #1541 Nice truck for restoration. Very nice grill. Has a few roof dents. Otherwise not bad for dents and quite solid. It does have some floor rust but has a nice lower body. Flathead 6 motor is free and should run. Has a 4 speed transmission and a 2 speed axle. Has a 12 1/2 foot flatbed with a hoist. The wheel base is about 160 inches. Good Title and delivery is available. SOLD! |
|
1948 Chevrolet COE - Stock #1736 Very nice 5 window cabover truck. This Loadmaster has the stainless cab trim. It was restored a few years back and has been used every year since. The 6 cylinder motor runs good. Has a 4 speed tramnsmission and a 2 speed axle. Solid 13 1/2 foot wood box with a working hoist. Will need a fuel pump and brakes bled to put it to work. Very solid truck with great floors. If you are looking for an original, look this one over. It's the best I have ever had! Good Title and delivery is available. Email classic1934@gmail.com SOLD! |
|
1949 Ford Truck - Stock #1725 If you are looking for a hobby farm truck to use like it is, check this one out. This is an original F-3 truck with a good running flathead motor and a 4 speed transmission. This one even has a working hoist. What you see is the original paint. Odometer shows 29,000 miles and this is believed to be actual. It even has a radio! Solid floor. It has been sitting for a few years so it will need the usual tune-up and brake bleed. Good North Dakota Title and delivery is available. Email classic1934@gmail.com SOLD! |
|
1950 Ford Truck - Stock #1589 This is a nice truck for restoration. Has a flathead 6 motor and a 4 speed transmission. The motor turns over and should run. Nice grill. Solid floors. 83,000 miles. The fenders have rust in the usual spots. Otherwise, the body looks quite good. Has a 12 foot box along with a PTO driven hoist. The wood bed will need some repairs. Good truck for rebuilding. Good Title and delivery is available SOLD! |
|
1950 GMC Truck - Stock #1704 This is a real nice 250 Series GMC for restoration or do a bit of repair and use it like it is. The 6 cylinder motor runs real good but will need a water pump. Real solid truck and very few dents. The floors have some rust scale but look solid. Has a 9 foot steel box with a PTO driven hoist. Don't miss this nice truck! Good Title. Delivery is available. SOLD! |
|
1950 B-42 Mack Truck - Stock #390C Very complete. The motor is free and should run. The truck has a dent in the rear of the cab. Otherwise very few dents and solid. The approximate size of this truck is: 19 feet long, 90 inches wide, and the wheel base is 13 feet 4 inches. Good Title and delivery is available. SOLD! |
|
1952 Chevrolet Pickup - Stock #1650 One of the nicer shortbox halfton's I have had. This one would be great for an updated drive train and leave the patina and drive it like it is. No motor or transmission. Very little rust and very few dents. Great floors. Good North Dakota Title and delivery is available. SOLD! |
|
1952 Ford Truck - Stock #1230 This is the popular F-1 version with the short box. Has a 4 speed transmission but the motor has been removed. Good one for a custom. Real decent body with good floors. Odometer shows 61,000 miles. Not much for rust in this one. Good N.D. Title and delivery is available. SOLD! |
|
1955 Chevrolet Truck - #392C Real nice truck for restoration or do some minor service work and use it like it is. The 6 cylinder motor runs good. Also has a 2 speed axle. Has a 13 foot steel box with removable sides and a PTO driven hoist. Very few dents and very little rust. Solid floors. Don't miss this very nice truck! Good North Dakota Title and delivery is available. SOLD! |
|
1961 Jeep FC170 - Stock #1744 Here is another hard to find FC170 Jeep that is ready to use like it is or freshen it up with your own paint scheme. This Jeep was painted a few years ago so it has some chips and marks from normal use. It is an Arizona truck so very dry. Great body, other than a small rust spot in the right front cab corner. I see no rust through and no dents. Nice floors. Has a good running 6 cylinder flathead motor and a 4 speed transmission. This one even has the auxillary overdrive. Runs and drives good. Don't miss this nice Jeep! Good North Dakota Title and delivery is available. SOLD! |
|
1967 Chevrolet Pickup - Stock #704 Good restoration project with a custom cab and the popular big back window. V-8 motor. Runs good and it has a 3 speed transmission. It will need rockers, cab corners and some floor work but all-in-all a great truck to restore. Good Title. Delivery available. SOLD! |
|
1972 3 Door Chevrolet Suburban - Stock #715 This is a nice 3 door Suburban to rod or restore. Very few dents and very little rust. 6 cylinder motor with a 4 speed transmission and a 2 wheel drive. We did have the motor running. These are very desirable and hard to find. Good Title. Delivery available. SOLD! |
 |
 |
 |
 |
 |
 |
 |
 |