SOLD UNITS

	1940 Ford Truck - Stock #720 Reasonable truck for restoration. Flathead V-8. The truck has some rust but not bad at all. Very complete. 57,000 miles. Nice grill. Good Title. Delivery available. SOLD!
	1940 Ford Truck - Stock #1015 Good project truck for restoration or even a rat rod. Not a lot of rust in this truck. Floors have some rust but not bad. Non-running 95 h.p. flathead with a 4 speed transmission and a 2 speed axle. Good North Dakota Title and delivery available. SOLD!
	1942 Chevrolet Truck - Stock #1112 This is a nice 1 1/2 ton truck for restoration. It has a running 6 cylinder motor and a 4 speed transmission. There is hardly any rust in this truck and not much for dents. Good floor structure. Very popular body style and sharp when completed. Good Title and delivery is available. SOLD!
	1946 Ford Truck - #1300 Nice truck and ready for restoration or use it like it is. This truck was used for hauling grain in the 2009 harvest. Has some rust in the cab corners, a little rust in the lower doors and minor floor rust. Otherwise a real solid truck. Has a running flathead V-8 and a 4 speed transmission. It does have a miss in the motor, but we have not checked it out. May be plugs or wires. Decent 750 x 20 tires. Has a 12 foot box with a working hoist. Good N.D. Title and delivery is available. SOLD!
	1947 Ford Truck - Stock #773 Good truck for a restoration project. Very complete. Has some rust in the driver footwell area of the floor. Otherwise very little rust in this truck and very few dents. Factory Ford 12 foot box with a hoist. Flathead V-8 was running when parked so should run with some work. 4 speed transmission. Good Title. Delivery available. SOLD!
	1948 Ford Truck - Stock #1373 This is an F-5 model with a flathead V-8 motor along with a 4 speed transmission and a 2 speed axle. The truck has 53,000 miles. I had the motor running and drove it around the yard but it needs a carb kit to see how good it runs. Has a 12 foot flatbed with a working hoist. Solid floors. Has dents in the cab roof and back panel. Comes with a good North Dakota Title. Needs total restoration or great for a rat rod. Delivery available. SOLD!
	1949 Chevrolet Pickup - Stock #1125 This is a RestoRod that has been professionally converted to an S-10 frame and suspension so it will drive and handle like an S-10. This is the popular 5 window cab and the body is very nice with great floors. The motor and tranny were not installed because we have requests for these pickups without engines so that you can install your choice of drive trains. This pickup is set up with the S-10 steering column, S-10 power brakes, S-10 power steering and S-10 fuel tank. A 350 motor and a 700 tranny is easily installed to make it a great driver! Leave the great patina or finish it off. The last picture shows the stance that this pickup will have once the motor is installed. Good North Dakota Title and delivery is available. SOLD!
	1949 Chevrolet Pickup - Stock #1182 This is a good 3600 series pickup for restoration. Has a non-running 216 six cylinder motor and a 4 speed transmission. Very little rust on this pickup other than surface rust. The floors are good. This one even has a hydraulic lift on the box. Front bumper will be included. Has a good North Dakota Title and delivery is available. SOLD!
	1949 Chevrolet Pickup - Stock #1364 This is the very popular 5 window 1/2 ton pickup and it is ready for cruising! Very nice driver quality pickup with new bumpers, new radial wide whites, new glass, rubber and channels and a new tailgate. Nice gauges. Runs and drives good. Has been converted to 12 volt so it starts good. Has been lowered about 2 inches so it has a nice stance. Don't miss this one! Good North Dakota Title and delivery is available. SOLD!
	1949 GMC Pickup - Stock #1316 This is a good one to restore. Do some minor mechanical such as brakes and tune up and drive this one as you restore it. This is a good running 1/2 ton pickup with a three speed standard transmission. It has the good GMC motor with the full pressure oiling system. A little rust on the right floor. Otherwise a real solid pickup. Hard to find a nicer one to start on. Good North Dakota Title and delivery is available. SOLD!
	1950 Chevrolet Pickup- Stock #1406 Very nice original 3800 series pickup. Original paint. Very nice body. Great floors. 216 motor runs well. Will need the usual tune-up and brake bleed. Miles show 37,992 and are believed to be actual. Even the cab corners look solid. Great patina. Do a little work and drive it like it is! Good North Dakota Title and delivery is available. SOLD!
	1952 Ford Pickup - Stock #1095 Real nice F-1 Ford for a custom project. No motor. Solid floors. Cab corners are getting thin and a little rust in the fenders. Otherwise quite solid and not bad for dents. Very desirable 1/2 ton shortbox. Good Title and delivery available. SOLD!
	1953 GMC Pickup - #350C This is the popular half ton 5 window pickup. Nice body and decent floors. The motor and transmission are gone but if you are looking for a restoration vehicle, we could find them at a reasonable price. This pickup has the petina for a Resto Rod with a V-8 and drives like it is. Good North Dakota Title and delivery is available. SOLD!
	1955 Ford Truck - #1301 Great truck for restoration or use it like it is. Has a good running V-8 motor and a 5 speed transmission. The mileage of 43,000 is believed to be actual. Has a 15 1/2 foot factory box and hoist. The box floor will need a few floor planks. The cab floor is very solid. Very little rust in this truck. Hard to find a nicer original. Good North Dakota title and delivery is available. SOLD!
	1956 Ford Pickup - #1397 This is the very popular half-ton short box 1956 Ford. Has a very nice straight body and is as rust free as I have ever seen. Has a little where the running board bolts to the fenders. Otherwise good. The floors are very nice. Already has the Mustang II front suspension installed along with disc brakes and rack and pinion steering. Set up for a small block Chevrolet motor. Don't miss this pickup if you are looking for an easy build project. Good North Dakota Title and delivery is available SOLD!
	1957 Chevrolet Pickup - #1342 This is the long box 1/2 ton model with a running 235 six cylinder motor and a 4 speed transmission. Has some rust above the windshield, the back of the front fenders, and a very minor spot in the floor. Otherwise, a real solid truck. This is a very desirable body style and very valuable when restored or rodded. Has a good North Dakota Title and delivery is available. SOLD!
	1962 Dodge Truck - Stock #657 This is the 500 Series Truck. It has a V-8, 4 Speed with a 2 speed axle. Nice 15 1/2 foot box with hoist. Runs good but will need exhaust work and the tires are getting old. Nice body with very few dents and very little rust. Good floors. Comes with a new seat! Good North Dakota title. Delivery available. SOLD!
	1962 Ford Truck - Stock #1148 This is an F350 model with a 9 foot factory flatbed and dual rear wheels. It has a running 6 cylinder motor and a 4 speed transmission. Odometer shows 85,950 miles. The motor smokes so it will need some work to put it into use. Has some floor rust and body rust. Priced very reasonable at $900 so it can be restored or parted out. Good Title and delivery available. SOLD!
	1963 Jeep Pickup - Stock #1386 Great pickup for restoration. This one has a good running GM 6 cylinder motor along with a standard transmission and 4x4 lockouts. Will need a little patch work for floor rust but otherwise I see no rust perforation. Very few dents. Will need the usual brake bleed and tune-up to make it a driver. Has the Jeep custom side trim. Don't miss this one! Good North Dakota Title and delivery is available. SOLD!
	1966 IHC Pickup - Stock #348C Here is a good solid 1200 A series IHC pickup ready to restore or use it like it is. V-8 motor runs good. Has a 4 speed transmission. Has 4 new 235 x 85R 16" tires. 54,000 actual miles. Don't miss this one! Good North Dakota Title and delivery is available. SOLD!